Add color to your career.

Job Descriptions

This position is responsible for ensuring the application and enforcement of our safety standards so that every team member goes home safe each day. The Safety Representative will help to identify areas where improvements can be made to ensure the health and well-being of everyone on the jobsite and play an active role in developing new safety protocols or procedures.

The SR is primarily responsible for enforcement of safety and health rules on the jobsite as required by federal, state, and local laws. The duties of the SSR include but are not limited to;

Responsibilities

• Conduct a Job Hazard Analysis, ensuring all employees have read, understood, and signed the JHA.
• Enforce safety rules on the jobsite as required.
• Conduct inspections of their work area and ensure all hazards are being controlled.
• Attending the weekly Jobsite safety walks, audit with General Contractor.
• Discipline employees per the Site Zero Tolerance Policy and company regulations.
• Conduct safety training and awareness programs such as Fall Protection, Ladder Safety, Respirator, Scaffold training and other relevant topics.
• Conduct investigations into accidents or incidents to determine causes and contributing factors and recommend solutions to prevent similar incidents in the future.
• The SSR shall accompany any injured worker that requires medical attention to the Project site-specific clinic. (Owner Controlled Insurance Program OCIP) (Contractor Controlled Insurance Programs CCIP)
• Generate relevant and accurate reports and establish and maintain all required job safety records.
• (Safety Culture Audits, Accident reports, Safety Violation Warnings and Toolbox meetings)
• Maintain records of any unsafe conditions in the workplace that need to be addressed.
• Ensure all safety equipment is in good condition and available for use.
• Conduct formal weekly jobsite inspections and complete safety checklists noting safety violations and corrective action.
• Monitor employee compliance with safety policies and procedures.
• Assist project superintendent/foreman in establishing and implementing proper fall protection, scaffolding, and painting control procedures.
• Perform periodic project audits with regards to compliance with all OSHA and Carrco safety requirements

Minimum Qualifications

• 1-3 years minimum experience in construction safety (Commercial Construction Preferred)
• OSHA 10-Hour and 30-Hour certifications within the last 4 years
• Current First aid CPR certification
• OSHA 3115 Fall Protection
• OSHA 3085 Principles of Scaffolding
• OSHA 2015 Hazardous Materials
• OSHA 2225 Respiratory Protection
• Bilingual: Spanish/English
• Experience using Excel, Procore, Outlook, and Autodesk Build (PlanGrid Application)
• Strong attention to detail with a dedication to accuracy
• Some travel required.

Preferred Qualifications

• Exceptional diligence and ability to work in a demanding environment.
• Outstanding customer service
• Proactive, solutions-driven communication skills
• Excellent time management with the ability to work independently.
• Advanced computer and organizational skills
• A proactive mentality and passion to get things done.
• Uncompromising authenticity and integrity

CLICK HERE TO APPLY.

Job Descriptions

The Safety Manager is directly responsible for managing the safety and risk associated with construction projects and company operations. The Safety Manager will proactively develop, plan, direct and implement Carrco’s safety program to ensure a safe, healthy, and accident-free work environment.

Responsibilities

• Develop and implement comprehensive safety programs, policies, and procedures for construction projects.
• Conduct regular safety inspections and audits of construction sites to identify hazards and ensure compliance with safety regulations and industry standards.
• Provide OSHA 10, OSHA 30, PE training and orientation for employees, subcontractors, and visitors to promote awareness and adherence to safety protocols.
• Investigate accidents, incidents, and near misses to determine root causes and develop corrective action plans to prevent recurrence.
• Maintain accurate records of safety inspections, incidents, training sessions, and safety-related documentation.
• Coordinate and monitor the medical treatment of injured employees and the return-to-work program.
• Help enforce Carrco’s Drug and Alcohol Policy, including handling site drug testing.
• Collaborate with project managers, contractors, and regulatory agencies to address safety concerns and ensure state and federal compliance.
• Stay updated on relevant safety regulations, best practices, and emerging trends in the construction industry.
• Communicate safety policies, procedures, and guidelines to project leadership through meetings, training sessions, and written communication.
• Participate in safety committees, meetings, and initiatives to promote continuous improvement in safety performance and culture.

Minimum Qualifications

• Minimum of 5 - 8 years of progressive experience in construction safety, with demonstrated leadership and managerial responsibilities.
• Strong knowledge and understanding of local, state, and federal safety regulations, including OSHA standards (29 CFR 1926) for construction safety.
• Have attained at a minimum a CSHO and OSHA 500 certification.
• Bachelor's degree in a related field is desired, or equivalent combination of education and experience.
• Bilingual (English – Spanish) preferred.
• Proficiency in using construction technologies and software, such as Excel, Procore, Plexxis is preferred.
• Proven experience in construction safety management, with a strong understanding of safety regulations and best practices.
• Some travel required.

Preferred Qualifications

• Excellent communication and interpersonal skills, with the ability to effectively communicate safety concepts to diverse audiences.
• Strong leadership and decision-making abilities, with a proactive approach to identifying and mitigating safety risks.
• Proficiency in conducting safety inspections, audits, and incident investigations.
• Ability to work independently and collaboratively in a fast-paced construction environment.
• Commitment to promoting a positive safety culture and ensuring the well-being of all personnel on construction sites.

CLICK HERE TO APPLY.

‍

Job Descriptions

This position is responsible for overseeing daily operations on construction sites, ensuring projects are completed on time, within budget, and to the highest quality standards. This role involves managing construction workers, coordinating with subcontractors, and ensuring compliance with safety regulations.

Responsibilities

• Lead and supervise construction teams, ensuring work is performed according to project specifications and safety standards.
• Assign tasks and responsibilities to workers and subcontractors.
• Provide training and guidance to construction staff as needed.
• Monitor project progress, ensuring that timelines and budgets are adhered to.
• Review blueprints, plans, and specifications to determine project requirements and scope.
• Work with project management team to understand project objectives and scope
• Help create and maintain a safe working environment while also maintaining production rates
• Enforce safety regulations and ensure that all safety equipment is used correctly.
• Conduct regular safety meetings and inspections.
• Communicate project objectives and responsibilities to field professionals
• Attend project planning meetings with client and trade partners
• Conduct pre-mobilization, quality, and punch walks
• Maintain client relationships.
• Send order requests to purchasing department and ensure accurate materials and supplies arrive on time to the jobsite
• Collaborate with project team to establish project logistics and schedule goals
• Coordinate manpower resources with leadership
• Provide accurate and constructive feedback on project progress and needs

Minimum Qualifications

• 3 years of experience in a supervisory role in construction, with a proven track record of successfully managing projects.
• 1-3 years minimum experience utilizing project management software
• Proficiency in reading and interpreting blueprints and technical drawings.
• Knowledge of painting, wallcovering, and flooring application processes
• Experience setting and meeting project milestones and deadlines
• Proficiency in Microsoft Office and professional communication
• Exceptional diligence and ability to work in a demanding environment
• Outstanding customer service and initiative-taking communication skills
• Excellent time management with the ability to work independently
• Advanced organizational and leadership skills
• Ability to multi-task and forecast
• Strong attention to detail with a dedication to accuracy

Preferred Qualifications

• Painting, wallcovering, and industrial flooring experience
• Bachelor’s degree in Construction Management or similar
• Experience working with Autodesk Build (PlanGrid Application), Plexxis, and Smartsheet

‍

CLICK HERE TO APPLY.

Job Description

This full-time position is responsible for applying the tape and bed process and finished substrates based on project specifications while maintaining jobsite safety, cleanliness, and quality standards.

Responsibilities

• Required to be responsible, reliable, and punctual
• Wear appropriate Painter’s Whites 100%on site
• Wear required Personal Protection Equipment (P.P.E) 100% on site
• Understand how to inspect sheetrock prior to taping and bedding
• Understand and apply different levels of finish (Levels 1-5)
• Ability to apply while on stilts (A+)
• Follow inspection, sanding, and taping & bedding procedures
• Ability to work with taping tools and work clean (Flat Box & Taping Bazooka (A+))
• Have all basic taping and bedding tools(mud pan and tape & bed knives)
• Follow safety rules and maintain a safe work environment  

Minimum Qualifications

• Proper documentation for employment
• Basic safety knowledge, equipment maintenance, and ability to work independently and as part of a team
• Attention to detail
• Experience in commercial construction
• Bilingual (Spanish/English)
• Reliable daily transportation required

‍

CLICK HERE TO APPLY.

Job Description

This position is responsible for applying paint, coatings, and finishes to various surfaces to enhance the appearance and protect structures. It involves working with various types of surfaces (wood, metal, drywall, etc.) and using different painting tools and techniques to achieve the desired results.

Responsibilities

• Applies protective and decorative coats of paint, varnish, lacquer, and/or other related materials to interior and exterior surfaces of buildings, furniture, equipment, and other structures.
• Washes, scrapes, sands, torches, and/or smoothes interior and exterior surfaces prior to painting, varnishing, lacquering or applying other related materials.
• Cleans equipment, paint mixing area, and work area.
• Operates compressors, striping machines, sandblasters, spray equipment, and other small power equipment.
• Installs, repairs, and maintains drywall, wall texturing, and ceiling acoustic texturing.
• Erects and utilizes various types of scaffolding, staging, ladders, planks, and stilts to reach surfaces of work area for Painters and others.
• Applies paints, stains, surface preparatory materials, and undercoating materials to a variety of surfaces, as appropriate, and according to Materials Safety Data Sheets ensuring compliance with hazardous materials guidelines.

Minimum Qualifications

• 3 years of proven experience as a painter or in a similar role.
• High school diploma or equivalent (preferred)
• Knowledge of painting techniques, tools, and safety practices.
• Ability to read and understand work orders, safety guidelines, and technical instructions.
• Strong attention to detail and precision in applying paint.
• Good physical stamina and ability to work at heights or in various weather conditions.
• Good communication and teamwork skills

CLICK HERE TO APPLY.

Job Description

We are looking for an experienced, hardworking construction estimator to join our team. This is a full-time position responsible for estimating and determining budgets, conceptual pricing, and overall costs of new and existing construction projects. Our estimating team also leads our sales efforts by maintaining client relationships and pursuing active and future projects.

Responsibilities

• Prepares and estimates conceptual, budgetary, and hard bid costs for construction by conducting digital take-offs and studying plans and specifications
• Writes up and presents budgets, reports, and project plans
• Develops bids and scope summaries for construction projects
• Works closely with general contractors, developers, architects, and other professionals
• Schedules meetings with clients, site managers, and staff
• Navigates and understands building and sustainability codes
• Processes paperwork and travels to building sites as required
• Stays up to date with improvements in construction
• Stays current with new materials, products, and applications
• Maintains client relationships takes an active role in sales pursuits
• Build and maintain relationships with key vendors
• Conduct project risk analysis

Minimum Qualifications

• 3-5 years estimating experience
• 3-year minimum experience estimating Division 9 trades
• Proficiency in construction document reading
• Proficiency in quantity take-offs and price estimating
• Proficiency in Microsoft Office
• Exceptional diligence and ability to work in a demanding environment
• Outstanding customer service and initiative-taking communication skills
• Excellent time management with the ability to work independently
• In-depth knowledge of project management
• Good understanding of data analysis methods and KPIs
• Critical-thinker and problem solver
• Proficiency in construction scheduling

Preferred Qualifications

• Bachelor’s degree in Construction Science or similar field
• Experience with Planswift

‍

CLICK HERE TO APPLY.

Job Description

This position is responsible for effectively managing the successful execution of construction scopes, application of safety and quality standards, on-site resources and duties, and client coordination.

Responsibilities

• Work with project management team to understand project objectives and scope
• Help create and maintain a safe working environment while also maintaining production rates
• Communicate project objectives and responsibilities to field professionals
• Partner with clients to communicate, create, execute plan for project completion
• Attend project planning meetings with client and trade partners
• Conduct pre-mobilization, quality, and punch walks
• Maintain client relationships
• Provide mutually beneficial and effective solutions to project challenges
• Send order requests to purchasing department and ensure accurate materials and supplies arrive on time to the jobsite
• Remain current on material lead times and execute appropriate procurement strategies to meet project needs
• Collaborate with project team to establish project logistics and schedule goals
• Coordinate manpower resources with leadership
• Utilize project management systems accurately
• Provide accurate and constructive feedback on project progress and needs

Minimum Qualifications

• 3 years of construction supervisor experience
• 1-3 years minimum experience utilizing project management software
• Knowledge of painting, wallcovering, and flooring application processes
• Experience setting and meeting project milestones and deadlines
• Proficiency in Microsoft Office and professional communication
• Exceptional diligence and ability to work in a demanding environment
• Outstanding customer service and initiative-taking communication skills
• Excellent time management with the ability to work independently
• Advanced organizational and leadership skills
• Ability to multi-task and forecast
• Strong attention to detail with a dedication to accuracy
• Bilingual (Spanish/English)

Preferred Qualifications

• Painting, wallcovering, and industrial flooring experience
• Bachelor’s degree in Construction Management or similar
• Experience working with Autodesk Build (PlanGrid Application), Plexxis, and Smartsheet

‍

CLICK HERE TO APPLY.

Job Description

This position is responsible for effectively managing the successful execution of construction scopes, application of safety and quality standards, project billing, and client satisfaction.

Responsibilities

• Work with preconstruction department to ensure project pricing is complete and accurate
• Establish project milestones and resource needs
• Partner with clients to communicate, create, execute plan for project completion
• Manage and track project costs, billings, and resources throughout the project
• Compile and provide project close-out documentation
• Maintain client relationships
• Provide mutually beneficial and effective solutions to project challenges
• Manage OFCI materials
• Remain current on material lead times and execute appropriate procurement strategies to meet project needs
• Collaborate with project team to establish project logistics and schedule goals
• Coordinate manpower resources with leadership
• Utilize project management and accounting systems accurately
• Provide accurate pricing for additional work order pricing and project change requests
• Coordinate with vendors to negotiate best pricing and delivery methods
• Complete LEED documentation
• Create project budgets
• Understand and enforce safety and quality standards

Minimum Qualifications

• 3 years project management experience
• 1-3 years minimum experience utilizing project management software
• Knowledge of tape and bed, painting, wallcovering, and flooring application processes
• Experience setting and meeting project milestones and deadlines
• Proficiency in Microsoft Office and professional communication
• Exceptional diligence and ability to work in a demanding environment
• Outstanding customer service and initiative-taking communication skills
• Excellent time management with the ability to work independently
• Advanced organizational and leadership skills
• Ability to multi-task and forecast
• Strong attention to detail with a dedication to accuracy
• Proven ability to calculate, post, and manage project costs and budgets

Preferred Qualifications

• Painting, wallcovering, and industrial flooring experience
• Bachelor’s degree in Construction Management or similar
• Experience working with Autodesk Build (PlanGrid Application), Plexxis, and Planswift

‍

CLICK HERE TO APPLY.